Monthly Archives: March 2017

Why You Should Use CNC Milling for Your Production

Although it is one of the most important processes in the production of so many day to day products we use, many people are unaware of just how important CNC Milling has been in their lives. From the production of circuit boards in television sets to cutting the metal parts in bread toasters, CNC Milling is literally involved in every area of our lives today.

In order to fully appreciate this technology, one must truly understand the impact it has on their lives or in society at large. This article aims to showcase some of the advantages of using CNC Milling as a technological process especially with regards to our everyday life.

Advantages of CNC Milling

For a technology that affects virtually every area of human lives, CNC Milling has played an integral part of our technological advancement over many decades. The following are some of the perceived advantages that it has over conventional milling technology and processes.

 

Cost:

In CNC milling, most machine parts are automated and programmed and as a result, only a designer is mainly required for the process to be successful. There is no longer a need to hire numerous workers to operate a milling machine.

Minimal supervision is also required in this milling process because once production of prototypes are supervised and tested successfully, the specifications only need to be copied to replicate the production process.

 

 

Advanced Productions:

In today’s advanced technological world, there are so many products that would never have been crafted manually even by the best machinists without the help of CNC Milling. This Milling process has enabled manufacturers produce very small components that are unimaginable to produce manually.

 

Absence of Human error:

Since the designs and specifications are mostly computer based and can be saved and copied for reproduction, there is essentially little or no room for human error.  This is also partly because the reduced workload involved in this process requires only one supervisor who periodically checks that the settings are correct on the machines.

Consequently, a reduced human workload also means that there will be less concerns over human safety at the milling plants.

 

Continuous Operations:

CNC milling plants can work all year round nonstop with only few scheduled stops for maintenance. This is important as it leads to quick turnarounds in the production of numerous day to day parts. In the mass production of computer and mobile parts such as circuit boards, there is need to produce hundreds of millions or even billions annually for different manufacturers and this would be impossible if milling machines had to only operate for a few hours daily.

Continuous operation of these machines is partly made possible by the presence of automated cooling systems which help prevent any heat damage.

 

 

 

Reduced Wastage:

Modern CNC Milling machines help reduce wastage by far compared to conventional machines. This is because of the accuracy that is involved when using CNC Milling machines.

When designs are made and specifications imputed, the machine accurately produces products based on the specifications thereby reducing errors and wastage that are associated with human experimentations.

If you’re looking for a great CNC Milling Service you can use Ezis Craft, I’ve had great success with them for my simple projects.

Conclusion

In conclusion, whether you’re a kid playing with a toy car or an adult using a computer or driving a car, these have all partly been made possible by CNC Milling and as technology continues to advance, so will the overall CNC Milling process.

Get A Proper RC Car For Your Kid

good rc car for kids

There’s no doubt that most of are in deep love with RC vehicles and the whole industry. RC industry has come a long way from the past couple of decades and have improved to a great extent. But even though RC vehicles are getting complicated with every passing day, the RC industry isn’t just concentrated on the adults. There is a considerable amount of remote control cars for kids and various other models flooding the market every day. After all, we all started our journeys when we were kids so the manufacturers are familiar with the importance of RC cars for kids. You can get a proper RC car from SwellRC website.

RC Cars For Kids

All Time Best Nikon Cameras

Nikon D3300 Review

 

Nikon D3300 is the most popular choice among beginner photographers, but that doesn’t mean you can’t take beautiful and professional photos with it.

Features

  • 88 x 3.86 x 2.99 inches
  • 460 grams weight
  • 24.2 MP camera
  • APS-C CMOS sensor
  • Fixed 3.0″ 921k-dot LCD
  • ISO 100-12800 (expandable to 25600)
  • 11-point AF (1 cross-type)
  • 5 fps burst/continuous shooting
  • 1080 60p HD video
  • Battery life of 700 shots

 

Pros

  • Great burst mode
  • Good image and video quality compared to its competitors
  • Reduced size of kit lens
  • Impressive amount of detail
  • Low price

 

Cons

  • No built-in Wi-Fi
  • Hard to understand manual focusing
  • Images grainy

 

Get More Information

Nikon D5 Review

 

Nikon D5 is intended for professional use because it contains many great features and design. The camera has a very user friendly layout and great autofocus.

 

Features

  • 3 x 6.3 x 3.7 inches
  • 1405 grams weight
  • 8MP camera
  • Full-frame image sensor (180K pixel)
  • Native ISO range 100-102400
  • Expeed 5 processor
  • 153-point phase detection autofocus with automatic fine tune
  • 12fps continuous shooting
  • 4K HD video recording
  • Touch enabled 3.2″ 2.36M-dot LCD for both stills and video
  • Battery life of 3780 shots

Pros

  • Improved ISO performance and increased range
  • Excellent 3 inch LCD with great touchscreen
  • User friendly layout
  • Geotagging
  • Incredibly fast autofocus
  • Strong low light performances

Cons

  • Heavy and bulky
  • High price
  • Non tiltable or rotatable screen

Get More Information

Nikon D3200 Review

This is an impressive camera by Nikon and you could say it’s an entry level one. This camera has a CMOS sensor with 23 Mega Pixels.

Features

  • 4 x 7.4 x 5.6 inches
  • 505 gram weight
  • 24MP camera with CMOS sensor (APS-C)
  • ISO 100-6400 (maximum ISO 12800)
  • Expeed 3 processer
  • 11-point autofocus (1 cross-type)
  • 0 inch 920k dot LCD
  • Full 1080p30 HD video
  • 4 fps continuous shooting with 92% viewfinder coverage
  • Battery life of 540 shots

Pros

  • Small design
  • Beginner friendly
  • Great Images

Cons

  • Price
  • LCD
  • No built-in auto focus

Get More Information